Creepy Eyes Wallpaper

After a very long time away from blogging, I'm back, and just in time for Halloween!! I've been crafting during the hiatus, I just haven't been sharing it on the blog as we've been a very busy family this year.

I'm not surprised that I had an urge to blog again right around the time I started thinking up ideas for Halloween. As I've mentioned before it is my absolute favorite holiday!

This year the inspiration for my interior decorations is coming from the Walt Disney World Haunted Mansion ride. I have a LOT to share with you over the next few blog posts, but I figured I'd kick it off with a simple and very cost effective craft I call "creepy eyes wallpaper".

Note: I did this by myself within 15 minutes but it is a very kid friendly craft if you have little helpers!

For those looking to recreate this craft you'll be happy to know it cost me a total of $4.50. I got the black tablecloth for $1.50 at Dollar General and the creepy eyes for $2.99 at Michael's. Other supplies you will need include scissors, tape, and a stapler, but you should already have that on hand.

After taking the tablecloth out of it's packaging I hung it on the door and found a crease to cut it from to size it right. Make sure you have extra tablecloth on the sides and the top so you can wrap it around the door frame. The only part you'll want to be cut accurately is the bottom as you won't be wrapping that under. As you'll see in the picture above, I had enough excess tablecloth that i could roll it and staple it on the top corner. This will help keep the tablecloth from sagging. You want it as tight to the door as possible.

You'll also want to make sure you pull it tight around the hinges so that you are able to open and close the door without the tablecloth ripping. For the doorknobs, cut a small hole in the tablecloth and push the doorknob through. Don't forget to also cut a hole for the door jam as well so the door will function properly.

After you are finished taping the tablecloth to the back of the door you can begin to apply your sticker eyes. I found the pack I bought at Michael's had a nice adhesive so I'm not worried at all that the stickers will fall off. On the other hand I was able to gently peel them off and move them if I needed to, although I don't recommend doing that too many times.

Above is the finished product! I hope you like what I created.

I think it's important to point out that the reason I call this a "creepy eyes wallpaper" is because you could easily do this on any wall of your home. I chose to do it on this pantry door because the area I am decorating is my kitchen and I was running out of wall space.... which means next up is a wall of creepy photos you won't want to miss!

Candle Holder Cookie Tray

This project was something I've wanted to try for a while. I really wanted to do something like this as dessert trays for my wedding. The few times I went to the thrift store last spring I wasn't able to find the right plate or I couldn't find a candle holder that was heavy enough. By chance, a couple months ago, I found two silver candle holders with a nice base and some decent weight to them. Not too far away, on the same shelf, I found matching China with a pretty blue flower pattern.

I used my hot glue gun on high heat for this project. The truth is I had a "win" and a "fail". I was able to get one of the plates to stick to the candle holder and maintain a grip. The other one wouldn't no matter how many times I tried. (Good thing about hot glue is if it won't stick it's pretty easy to peel off.) 

I'm not really sure what the solution is... possibly gorilla glue? or super glue? If I ever find the time I'll try it again. If this project interests you there are lots of other "pins" on Pinterest that might be able to provide additional insight.

Valentine's Day Cards

I warn you in advance that this is going to be an entry where I gush about how proud I am of Crafty Kid. Everything you see in this entry she made herself, from start to finish, with no help from any adults. 

I was out all day yesterday and came back to find these beautiful cards and a wonderfully laid out crafting work area. Talk about being impressed! She even had my 13-year-old stepson helping her because she showed him how to use the Cuttlebug embosser and he loved it. If that isn't enough, today I showed her how to use Photo Grid and she made the collage image you see above for the blog :)

As you can see she had her crafting area laid out nicely. The biggest problems any crafter faces is the issue of time and space. Nobody wants to waste a lot of time setting things out or cleaning them up. Or waste even more time digging through things to find what they need. And most people have to use their kitchen table (like we do) and so you have a limited work space. I taught her to create work stations for the cards so that she knows where everything is and can easily go from one step to the next. 

She set up the following stations: Paper, Cutting, Embossing, Gluing, Embellishments, and Stamping. Everything was laid out on the kitchen table lining the perimeter, like a horseshoe, and she worked off of the clear space in the center.

Obviously taking time to set up was not her favorite thing in the beginning. She just wanted to get right down to crafting, and this always left a big mess. Scissors lost under paper, embellishments on the floor, no table space when you needed to emboss. Of course that lead to frustration, and let's face it, at 11 you kind of just give up on it at that point. I was then stuck cleaning up everything to make sure it got back in it's place, which could take up to 30 minutes. (Again, goes back to knowing where things are so you don't waste time digging through everything.)

So this breakthrough she had is a big win for everyone! She's productive and happy making the cards, and it took me all of 5 minutes to get everything back where it belonged the next day.

As far as card design, it was her idea to buy the doilies a few months back. Look at how creative she was with using them! I was also super impressed that she mixed and matched so many techniques. (Layering paper & doilies, stamping, embellishments, embossing, shape punching)

Making these cards takes time and patience. I'm proud of her for following through with her creativity and learning at the age of 11 how important it is to be organized.

Holiday Ornaments: Part 2

So the Holiday season has come and gone yet again. I may have been quiet on the blog the last few weeks, but we sure have been busy crafting, party planning, and decorating! I'll have lots to share in the coming weeks.

I figured it would be best to start with the second half of our ornament project. I had held back on blogging about them because the Disney themed ones were a gift for my family. Crafty Kid had a great time making these and I was glad I came up with the idea because they were easy to make as well. We really loved making the spiral paper ornament! It was a lot of fun to do and such a beautiful result.

For this craft you will need the following:

• Double sided scrapbooking tape
• Mickey scrapbooking paper (or character of your choice)
• Paper Slicer or sharp scissors
• Q-Tip or a pencil
• Styrofoam or Epson salt (if you want to add "snow")

The first round of ornaments Crafty Kid and I were having trouble deciding what looked best inside the ornament. Some of our issues were that in order to get bulkier items to stay we needed glue, which was difficult to use due to the small opening on the top of the ornament. The paper items often just fell on their side and again gluing them to the wall of the ornament was a bit of a process. Not to mention only one side of the paper had a print on it so if it flipped over it just looked like white paper.

We had some scrapbook paper with larger sized Disney character faces on it, and luckily before we went to use it I had a breakthrough. I realized we could glue two of the characters together so there was a design on both the front and the back. In the ornament above we cut out two of the Mickey faces and glued them together with double sided tape. Then we rounded off the edges with a small, sharp pair of scissors.

We then put the double sided Mickey paper inside the ornament. We were super happy to see it stood up inside the ornament. We had some packing styrofoam I saved, so we broke it into pieces to put inside the ornament to create a snow globe effect. Crafty Kid really LOVES her glitter glue so she put some drips of it on the outside of the ornament.

For the Minnie and Pluto ornaments above we followed the same initial steps. Once the Minnie paper was inside the ornament we used Epson salt as snow and Crafty Kid dotted the top with white glitter glue. For the Pluto ornament she decided she wanted to dot the entire ornament and leave just the Pluto paper inside.

This ornament above is hands down my favorite! We were messing around with some smaller strips of scrap paper and came up with the idea to spiral it. I showed Crafty Kid that she could use a Q-Tip to roll up the paper and she ran with it! We used a couple different shades of silver paper. I cut the thin strips and she rolled them up. Some we stuck inside at that length, others we cut to different lengths. It came out so pretty.

Note: We put some glitter and flat white gems inside. I don't think it's necessary. You can barely tell unless you look very closely at the bottom, which is where they sank to. That's the beauty of the paper is it's so light as a spiral it has a floating effect.

So as promised from my previous Holiday Ornaments: Part 1 blog, above is my melted snowman Pinterest fail. Mine, of course, is the one in the right hand corner. Honestly it doesn't look as bad as I remember, but it still wasn't as cute as what I saw on Pinterest. 

Just goes to show that not all craft projects are as easy to replicate as you think. That's why when I blog I do my best to go step by step. I hope it's helping those reading with some ideas and inspiring you to craft on!

Holiday Magnet Name Cards

This was a craft I made to enhance favors for our Holiday Party at work. The only thing I had to purchase was the magnets for the back. I figured if I was going to spend 4 hours making 30 place card name tags I could at least make them a reusable item :)

You will need:

• Scrapbooking Paper
• Decorative Scissors
• Crafting Glue or Double Sided Tape
• Regular Scissors or Paper Slicer
• Snowflake Punch Out
• Snowflake Brads (if you want)

All of the name cards I made had slight differences. I am just going to show you an example of two different ones. For all of them I used my paper slicer to cut the base paper out, and used the backs of scrap paper for the center piece, which I wrote the names on. The one above I punched out 4 snowflakes and used the scraps as well. I glued all the pieces together using crafting glue that dries clear. 

For this one I used 3 pieces of paper that I layered on top of each other. Again I used the crafting glue. I also used the decorative scissors to create a fun edge. For an added touch I put 2 snowflake brads on the corners.

The final touch was to add an adhesive magnet to the back. I bought a 25ft roll and have plenty left over for other projects. Although this is a simple craft I do have a few tips:

• I found it easiest to stick with the 3 layered look. I just switched up which papers I was putting together. It was fun to play around with different patterns.
• I liked the common theme of them all having paper snowflakes. I only used the brads on my example.
• The decorative scissors really gave them a nice finish. You can even cut it to make decorative edges. (Which you can see in the right corner of the picture above)
• BIGGEST TIP:  I found it was much easier to use double sided scrapbooking adhesive. I use the permanent kind and it sticks together really well. Plus it saves you from waiting for the glue to dry.

Corkboard Picture Frames

A couple of months ago Crafty Kid was with me at Michaels and we picked up a bunch of raw cork for a school project she was working on. It was marked down 60% and I figured I would eventually find a use for it. Flash forward to a couple weekends ago, my sister was in and we went to the Salvation Army. I found a bunch of picture frames between $.50 and $1 a piece. Score! I knew immediately that I could make some pretty cute framed corkboard memo/keepsake holders.

Supplies needed for this project:

• Raw Cork Pads (4x4 size used here)
• Picture Frames
• Cardboard 
• Crafting Knife (exacto)
• Hot Glue Gun

First thing I did was take out the glass in the picture frame. (Consider keeping it for future projects if you have the room to store it.) I then took a cardboard box and cut it to the size of the frame since this is what you are going to glue your raw cork on to. Make sure to put the unmarked side of the cardboard facing up because the color closely matches the raw cork. Close the back of the frame up. Now you can start to space out your raw cork.

I glued a solid 4x4 square of the raw cork in the top corner with hot glue. From there I started to measure out the pieces that would fill in the rest of the space on the cardboard. I have no tip or trick here. I just eyed it up and tried to be precise. The crafting knife cuts the raw cork nicely. I scored it and then gently cracked the raw cork in half. I then used the crafting knife to clean up the cut edge. I glued these pieces into place until all of the cardboard was covered.

As you can see above they turned out nice! Don't worry about small gaps in the cork puzzle pieces you've now connected. The cardboard underneath is such a close color you can barely tell. Also, if you are truly using these for their intended purpose they will soon be covered in memos, pictures, and keepsakes.

I think this could make a great gift as it can be utilized in both your home or at the office.

Season's Greetings and Christmas Cards

Crafty Kid got an offer to have her cards in a local store. She's SUPER excited. I'll show you the cards we worked on the other day below and talk more in depth at the end about our new adventure.

For this project we used the following:

• Cards
• Scrapbooking Paper (Holiday Themed)
• Decorative Scissors
• Crafting Glue or Hot Glue (we used a glue gun)
• Snowflake Punch Out
• Scissors or Paper Slicer

For the two cards above it was really simple. We used the paper slicer to cut the scrapbook paper. Then Crafty Kid used the decorative scissors for a more interesting edge. We had some scrapbook paper that had holiday phrases on it so we cut those out as well. Then we hot glued the cut outs onto the card. (Use the glue of your choice to adhere it.)

We used silver star brads for the card above. Taking the tip of a sharp scissor we made a small puncture in the card. We put the star through and bent the flaps through on the other side. Then we glued the cut out holiday phrase scrapbook paper onto the card. 

This one above I had so much fun with. We had scraps of paper left over from other cards and cut them into different stacking block shapes to make a tree. For a finishing touch we put a punched out snowflake as the star. The Merry Christmas card on a polka dot green background seemed like a nice modern twist for a holiday card.

*****************************************************************

Ok. So back to the entrepreneur adventure.... There have been a lot of talks in our house as to what to make, how much to sell it for, and how much work goes into it. I'm proud of her, and I think this opportunity will help her understand things from a business perspective. I want her to be aware of the time, energy, and money being put into the creation of the cards, but at the end of the day I just want it to be fun. I think it will make her appreciate what it takes to be a hard worker.

She's already mentioned to me that sometimes she just doesn't "feel like" crafting. She also said that sometimes she doesn't feel like she does enough. (For example I hot glue all the pieces because our new glue gun heats up to 380F. Very effective. Not so good for kids.) I remind her that she is the creativity behind the crafts, and to be excited she has naturally intuitive vision when it comes to things of an artistic nature. (She draws and paints in addition to what we work on.) I've explained to her that the construction of the craft can be improved through repetition, and that her creativity will only expand as she uses it. Bottom line is to have fun and spend time together. I think she gets it. She's a smart kid after all.

We'll be sure to keep you updated!

Holiday Ornaments: Part 1

It's that time of year to make the Christmas ornaments. This is the third year the kids will make homemade ornaments for the family. I have to admit the two prior years I picked the projects and I kept it simple and fun. This year with Crafty Kid being so interested in crafting I let her help me pick out items at Michael's that we would use to decorate and fill our ornaments. I have to take advantage of what little time is left where I am "cool step-mom" and she wants to spend hours on end with me seeing where our creativity will take us.

Below are a list of items we picked up to use. Other than the ornaments themselves this is just a suggested list of decorative items you can use:

• Ornaments (plastic is best for kids to work with)
• Punch outs (Star, Snowflake, Heart)
• Scrapbooking paper
• Glitter
• Epson salt (looks like snow!)
• Crafting glue (dries clear)
• Glitter glue (silver, gold, & white)
• Embellishments

We chose clear plastic ornaments that were flattened so the items didn't have as much room to move. However round, square, or any size plastic fillable ornaments would work for (most of) these projects.

I had found some Mickey Mouse scrapbook paper on sale for $.07 and thought it would be fun to use different punch shapes with this paper. I started to punch out the paper and realized filling the ornament was going to be very hard to do. Since the paper had a white backing this made for a great snowflake cut out. I decided to glue some of the snowflakes and some carefully cut out Mickey's to the inside of the globe. Through trial and error I found that crafting glue (for foam, wood, or plastic) works best as it dries clear. I used a Q-tip instead of the brush in the glue jar, as that was too messy, to put the glue on the cut out paper. I then put the cut out on the top of my pinky and carefully put it inside the ornament. Each time before the glue would dry I would swirl the glitter around so that it would stick to the sides. Hopefully you can see in this last picture that it turned out great once the glue was fully dry.

While I worked on my Mickey ornament, Crafty Kid was up to her own projects. She really loved using the glitter glue as you can see below. She thought it made everything look nicely "frosted". The glitter glue bottles were a $1 a piece find. Go figure it was her favorite thing after all the money we spent! (LOL) The Epson salt we are still deciding if it's as cool of a "snow effect" as we want. Full disclosure that we originally wanted to make "melted snowmen" but that didn't turn out as nice and easy as what we saw on Pinterest. I might share my "fail" with you in the next blog. (Hence part 2 of Holiday Ornament's coming soon!)

Below are some of the ideas we came up with using what we had on hand. It's always great to save what you can from previous projects. Those yellow flowers and the red cherries are left over from when I made my Mary Poppins hat!

Hope you enjoyed seeing some of the things we made. Stay tuned for Part 2.

Creepy Science Lab - Halloween Party

I know Halloween is over, but i just HAD to share this blog with you even if it is late. I did promise you in my last blog post about the DIY Fake Blood - Tablecloth Decoration that I would follow up with other Halloween decor I was working on. The friend who offered their home up for the Halloween party really wanted to have a Creepy Science Lab theme.

The first part of this blog I will talk about some of the DIY stuff I put together to match her theme. The second part of the blog will show how the overall theme turned out when everything was put in place. (Please note that the lab stuff was borrowed and so i can only share with you the cost of things I helped to make.)

This first one was really easy and cheap. You will need mason jars, yellow food coloring, and rubber bats, rodents, spiders or whatever other creepy realistic rodents/pests you can find. Rubber rodents are $1 a piece, Mason jars $1 to $2, food coloring is around $3 and so it should cost about $10 to make 3 "mad scientist jars".

We left the rat alone in one jar. His beady red eyes looked awesome in the yellow water. The other jars we cut off the bats wings and put each wing and the body in separate jars. You just drop in around 10 drops of yellow food coloring and fill the jar with water.

Tip: A lot of sauces you buy at the store come in mason jars. Peel off the labels and reuse them for these kinds of projects.

Ripped up black curtains help set the mood for the room, which of course is always "dark and creepy" when it comes to Halloween. We took old curtains and shredded them using scissors. (If you don't have any black curtains lying around I suggest checking out your local thrift store.) In the above picture I'm showing you how to create realistic wear and tear on "50 years left behind" curtains. 

One method is to twist a piece of the curtain with your fingers, then cut a chunk of that off and that will make a jagged hole in the curtain. Another way is to get a pair of scissors (preferably dull blades) and instead of cutting straight, pull down tight on the curtain and rip up with scissors. This makes it so that your tears and cuts aren't all in a straight line.

We really scored when we found these mirrored wall candle holders at the thrift store. I believe we paid $1 a piece for these and $.20 a candle. We took black Plasti Dip ($10 a can) and sprayed that over it to get our desired look. The bonus on Plasti Dip is it peels off if you want your item to go back to the way it originally looked. We taped the mirrors before we sprayed them to get a clean look.

Well that about sums up the DIY projects I worked on for this party. I will point out things in the pictures below that we were able to find at a cheap price. Again the lab stuff is real and was on loan :)

Thrift store items: gold tray $1, candle holders $1 each, gray metal box $2, gray yarn $1 (and seriously what a cool "dust" effect that made)

Loved the use of the electronic tea candles. You can get a 12 pack of these on Amazon for around $10. Great thing is you can use them for many other events too.

There are some real brains and some fake brains in this picture above :)

Bought those pop up paper wall spiders you see above for $2 at Michaels. It was on clearance right before Halloween and was Martha Steward brand. The sconce was $2 at the thrift store.

Gold candle holder was $1 thrift store find. The light and cabinet above are covered in "creepy cloth" and bought at the Dollar Tree. Hard to tell from the picture but the purple light bulb was a cool effect in person.

Our guests even made "creepy" snacks and bought wines that had Halloween fitting names. It was a great night out and we had a lot of fun with this party.

DIY Fake Blood - Tablecloth Decoration

I'm helping a few friends decorate for a Halloween party and I couldn't wait to share the results of this project!! Let's call it a "sneak preview" because we have plenty of other great things we made I will blog about shortly. I've personally never tried to make fake blood and wasn't sure how this would turn out. I will happily admit it worked better than expected (with a little trial and error) and that I had SO much fun unleashing my inner Dexter! ( lol )

Now I will admit that there are plenty of "fake blood recipes" out there if you just Google them, but I decided to wing it with what I already had in the house. If you are a by the book type of person you might want to do a little research to see what recipe works best for you.

I started off with 2 cups of water and added some corn starch for thickening. My lesson here is that it didn't really do much. (So honestly you can probably skip the corn starch.) Also, when I put about 40 drops of red food coloring it only really turned the water a dark pinkish color. I didn't want to use up all my food coloring so I started adding chocolate syrup and cocoa powder until I got the color I wanted. It wasn't really that much, maybe 2 tablespoons of each.

My BIG TIP here from trial and error is to start off with less water! That way you don't have to mix in as much of the other ingredients. I will say that having 2 cups was helpful to me though since i decided to decorate the tablecloth with my hand. More on that below...

I considered using gloves and realized it wouldn't get me the desired effect I wanted. I just had to see what my hand print was going to look like because I was dying of curiosity. I also knew that it would reveal to me if the mixture i created was dark enough in color to truly show on the material. As you can see above it worked out well. (Note: I call this a tablecloth because that is what I'm using it for to decorate. It is actually a long white window sheer curtain.)

Now my next technique idea was discovered because of the fact that when i pulled my hand off the material my finger tips dripped the excess onto the tablecloth. I immediately thought, wow that looks like pretty authentic blood spatter, and no that doesn't make me crazy it just proves I've watched every episode of Dexter (some twice)!

So then I decided to take a page right out of the Dexter book and flick my fingertips outward. (If you haven't seen the show, he often recreates the blood spatter of crime scenes by throwing fake blood to see the velocity and trajectory.) The result was really awesome and seriously fun! See for yourself below...

A few other things I decided to do was write "help me" and take my hand and drag it across the material to make a smeared pattern. I let it dry for 15 minutes and then threw it in the dryer for another 15 minutes. The material seems to be holding the color. I do wonder though if it wouldn't just wash right out if I sent it through on a soak cycle. However, I advise that whatever you decided to decorate with fake blood that it not be something important in case the staining is permanent.